BRUSSO - The L-37 brass offset pivot cabinet hinge is employed when a minimum of visible hardware is desired or when the door must swing free of its frame. It is mortised into the top and bottom of the door and frame; only the pivot is visible. The...
BRUSSO - The ST-12 brass straight pivot cabinet hinge is employed when a minimum of visible hardware is desired or when the door must swing free of its frame. It is mortised into the top and bottom of the door and frame. The leaf measures 1-3/8" x...
BRUSSO - The LH-201 and RH-201 brass, heavyweight, lift-off, cabinet butt hinges with two knuckles are used for doors with thicknesses between 3/4 inches and 1 inches. They measure 2-1/2 inches x 1-3/4 inches . DIMENSIONS SCREW SIZE TABLE
BRUSSO - The JB-101 brass square knuckled full mortise butt hinge is engineered with a built-in stop that allows a lid to remain open at 95deg.. It is milled from heavy brass stock and can be used when an additional stay is not desired. It measures...
BRUSSO - The CB-302 full mortise butt hinge, milled from heavy brass stock, is one of four different sizes manufactured for boxes and small cabinets. Available with or without ball finials. It measures 1-1/4 inches x 13/16 inches . DIMENSIONS...
BRUSSO - The ST-97S stainless steel straight pivot cabinet hinge is employed when a minimum of visible hardware is desired or when the door must swing free of its frame. It is mortised into the top and bottom of the door and frame. The leaf measures...
BRUSSO - The ST-97 brass straight pivot cabinet hinge is employed when a minimum of visible hardware is desired or when the door must swing free of its frame. It is mortised into the top and bottom of the door and frame. The leaf measures 3 1/4" x...