BRUSSO - The LH-201 and RH-201 brass, heavyweight, lift-off, cabinet butt hinges with two knuckles are used for doors with thicknesses between 3/4 inch and 1 inch. They measure 2-1/2 inches x 1-3/4 inches .

• DIMENSIONS
• SCREW SIZE TABLE

===========================================================================

IMPORTANT INFO

Unfortunately in this context LH can confusingly refer to both LIFT OFF HINGE and LEFT HAND HINGE

The other contentious issue is the designation as handed; does it refer to as looking AT THE DOOR or looking OUT FROM THE DOOR?

This discussion arises also with box lid stays - are you in the box or looking out of the box or outside looking at the box

Brusso packaging is as follows;

               DESIGNATED LEFT HAND             DESIGNATED RIGHT HAND

The likely standard use is to fix the leaves with the pin on the JAMB and the leaves with the socket on the DOOR however either seem to work because the pin carries little load.

Opinions and comment welcome - This email address is being protected from spambots. You need JavaScript enabled to view it.