Results 12561 - 12580 of 17668 Show:     Items Per Page
  • File, Machinist's, Glardon/Vallorbe, Half Round, HRC 64~65, Double Cut, CUT 0, Cut Dimensions 125 x 13 x 4mm, #705020
    Item Code: T6433
    $ 124.70
    Item Code: T6433
    $ 124.70
    Mould, Casting, Technical Plastic, Double Pen Blank, Interior Dims 152 x 51 x 32mm, #790304
    Item Code: E0384
    $ 124.70
    Item Code: E0384
    $ 124.70
    Bit, Auger, ELITE SERIES, #0089, 16mm Diam., Flute 580mm, Overall 650mm, 12mm Hex Drive, Nickel Plated, #0089160650
    Item Code: W2523
    $ 124.71
    Item Code: W2523
    $ 124.71
    High efficiency powerful clamping. Screw is fully sealed and lubricated for life. Suited to work in humid, salty or wet environments. Hardened steel tommy bar. Spanish Made. See below for full table of sizes and specifications. See item A5000 for...
    Item Code: E5718
    $ 124.80
    Item Code: E5718
    $ 124.80
    Stick, Hiking, Telescopic, #45K4217
    Item Code: E0765
    $ 124.81
    Item Code: E0765
    $ 124.81
    Catcher, Spider, Long Handled, pair #AT218
    Item Code: N0640
    $ 124.81
    Item Code: N0640
    $ 124.81
    Meter, Moisture, Pocket, Pin Style, #09A0517
    Item Code: E0846
    $ 124.81
    Item Code: E0846
    $ 124.81
    Protractor, Boker, #1521/150
    Item Code: T7127
    $ 124.83
    Item Code: T7127
    $ 124.83
    t2014.jpg
    t2014.jpg
    German made. Capacity: Plastics to 8mm, Mild steel to 3mm, Aluminium to 2mm, Copper to 2mm, Stainless steel to 1.5mm. Bolt is M10 x 1.0 pitch.
    Item Code: T2018
    $ 124.83
    Item Code: T2018
    $ 124.83
    t2014.jpg
    t2014.jpg
    German made. Capacity: Plastics to 8mm, Mild steel to 3mm, Aluminium to 2mm, Copper to 2mm, Stainless steel to 1.5mm. Bolt is M10 x 1.0 pitch.
    Item Code: T2019
    $ 124.83
    Item Code: T2019
    $ 124.83
    c0108.jpg
    c0108.jpg
    Australian made and guaranteed fresh. Fast cure, high strength general purpose, modified PVA. Open time 3mins, 30 mins clamp. Water wash up, minimal OH&S cautions. Wood Works decanted.
    Item Code: C0111
    $ 124.84
    Item Code: C0111
    $ 124.84
    Clamp, Carcase, Piher, PRL 400, 85 x 800mm, #721015
    Item Code: E6121
    $ 124.89
    Item Code: E6121
    $ 124.89
    Blades, Scroll Saw, Pinless, 1 gross, #9 ANTILOPE BLUE, #101
    Item Code: L1554
    $ 124.91
    Item Code: L1554
    $ 124.91
    f4190.jpg
    f4190.jpg
    STUBAI - Austrian made, finely honed, the standard #52 Series carving tool from Stubai has an internal steel ferrule to minimise splitting. In this website the Stubai Series 52 and Series 55 tools are each grouped into their STRAIGHTS, LONG BENTS...
    Item Code: F4203
    $ 124.92
    Item Code: F4203
    $ 124.92
    Gouge, Long Handled, Hollowing, Sweep 9, 48mm Diameter, #701003
    Item Code: F6525
    $ 124.93
    Item Code: F6525
    $ 124.93
    Setscrew, Solid Brass, Countersunk Slotted Head, with Nut & Washer, M6 x 50mm x 1.0mm pitch, 12 sets
    Item Code: J3699
    $ 124.96
    Item Code: J3699
    $ 124.96
    e3866.jpg
    e3866.jpg
    EZE-LAP - Double sided plates enable you to sharpen and polish to a razors edge with the convenience of one product. Reshaping can be done with the heavier sided grit, then simply change sides to hone and fine polish using the lighter grit. All...
    * Product has attributes
    g0020.jpg
    g0020.jpg
    Printed on high quality parchment type paper.
    Item Code: G0125
    $ 125.00
    Item Code: G0125
    $ 125.00
    Cap Iron, suits #4-1/2, #5-1/2, #6, #7, Bench Planes & Clones, 60.3 x 3.0mm, (2-3/8 x 0.118 inch), #BK238, #19P2046, #702182
    Item Code: S2074
    $ 125.00
    Item Code: S2074
    $ 125.00
    resized/t4766_60x150.jpg
    resized/t4766_60x150.jpg
    Splitter, Block, Head 3500gms, Length 850mm, #672902
    Item Code: T4767
    $ 125.08
    Item Code: T4767
    $ 125.08

Product Categories