Results 15301 - 15320 of 17704 Show:     Items Per Page
  • Clamp, Cam, Klemmsia, 6 sie options
    Item Code: Y0900a
    $ 34.47
    Item Code: Y0900a
    $ 34.47
    * Product has attributes
    Parts, for Ball Point Pen, Twist Action, SLIM STYLUS , 3 Finish Options.
    Item Code: P8537a
    $ 33.07
    Item Code: P8537a
    $ 33.07
    * Product has attributes
    a0490.jpg
    a0490.jpg
    These allow for a simple and low cost method of locating the holes for dowells. Simply drill the hole in the first piece (accurate centering is not essential) , insert the dowell pin and bring the mating piece together and tap it which l
    * Product has attributes
    e2106.jpg
    e2106.jpg
    Front Vice Guide, Heavy Cast Iron Version The extremely robust and torsion-resistant vice mechanism is designed in such a way that even pressure is exerted over the entire width of the vice, even when you clamp workpieces in one jaw end only and...
    Item Code: E2106
    $ 785.28
    Item Code: E2106
    $ 785.28
    Blade, for Veritas Small Shoulder Plane, 1/2 x 1/8 inches (nom. 12 x 3mm)
    * Product has attributes
    t4951.jpg
    t4951.jpg
    EMMERICH - Rebate Plane - German made by E.C. Emmerich - Plane has adjustable fence & nicker. Especially suited to panel raising (although model #48S does this better with a fence attachment) , trimming long or cross grain dovetail grooves and cross...
    Item Code: T4951
    $ 555.05
    Item Code: T4951
    $ 555.05
    t4957.jpg
    t4957.jpg
    Plane, Toothing, 220mm x 48mm Iron, approx 70 deg Bed, Hornbeam Sole, #702236
    Item Code: T4957
    $ 214.79
    Item Code: T4957
    $ 214.79
    t4962.jpg
    t4962.jpg
    EMMERICH - Trims veneer or plastic laminate overhang flush with edge.
    Item Code: T4962
    $ 363.65
    Item Code: T4962
    $ 363.65
    t4963.jpg
    t4963.jpg
    EMMERICH - Slices veneers up to 1mm thick and usful to trim overhang.
    Item Code: T4963
    $ 184.45
    Item Code: T4963
    $ 184.45
    s4500.jpg
    s4500.jpg
    See table on detail screen for dimensions
    * Product has attributes
    Sharpener, DMT, Marine Knife & Fish Hook, Folding, FINE /EXTRA FINE, 110 x 23mm, #715194
    Item Code: E2872
    $ 153.73
    Item Code: E2872
    $ 153.73
    Chisel, Butt, Pfeil, Lee Valley, 3/4 inch 19mm, #44S0206
    Item Code: T8873
    $ 79.54
    Item Code: T8873
    $ 79.54
    Reamer, Peg, VIOLIN, Herdim, SLIM TIP, SPIRAL Edges, UNCOATED, #730523
    Item Code: Y4617
    $ 241.78
    Item Code: Y4617
    $ 241.78
    Clamp, Cam, Dual Head, 1200mm open x 110mm depth, Klemmsia, 1265gms, #705818
    Item Code: Y0910
    $ 120.00
    Item Code: Y0910
    $ 120.00
    Parts, for Ball Point Pen, Twist Action, EURO ROUND TOP, 4 Finish Options.
    Item Code: P8542a
    $ 35.88
    Item Code: P8542a
    $ 35.88
    * Product has attributes
    Turning Projects, All New
    Turning Projects, All New
    Turning Projects, All New
    Item Code: B2490
    $ 45.09
    Item Code: B2490
    $ 45.09
    e2113.jpg
    e2113.jpg
    DAWN - Australian made, twin trunnion standard series bench vice with plated screw and handle. Jaw faces pre-drilled for cheek mounting.
    * Product has attributes
    t4952.jpg
    t4952.jpg
    EMMERICH - Filister Plane - German made by E.C. Emmerich - Plane has adjustable fence & nicker and depth stop. Especially suited to panel raising, trimming long or cross grain dovetail grooves and cross grain work.
    Item Code: T4952
    $ 621.17
    Item Code: T4952
    $ 621.17
    Rod, Wooden Dowel, Inch Sizes, Run-of-the-Mill, Maple or Birch, 12 inch (304.80) Long, 6 Diameter Options
    Item Code: W1900a
    $ 18.28
    Item Code: W1900a
    $ 18.28
    * Product has attributes
    Saw, Panel, Bad Axe, 22 inch (560mm), CROSSCUT 10ppi
    Item Code: T1520a
    $ 1,007.67
    Item Code: T1520a
    $ 1,007.67
    * Product has attributes

Product Categories