Smooth-running, double-track table extenders made from three pieces of 7/8" × 2 1/4" (22 x 56mm) hardwood.

They are fully machined with sliding dovetail fittings, drilled and countersunk for attachment. Outside slides are machined slightly proud to eliminate top friction and are ridged for stable attachment. They are slightly arched to compensate for sag; the four-legged table extender is convex and the pedestal style is concave. Equalizers (to prevent tipping) are used only on the pedestal style.

With a closed length of 26" or 46" (660 or1,168mm), the maximum table opening is 26" or 46" less 1/4" (6.35mm) for pedestal tables) and the slides extend to 51" (1,295mm) and 92" (2,336mm) respectively.

Made in Canada.

• Sliding Dovetail Fittings: All-wood double-track construction uses sliding dovetail joints for smooth, rattle-free extension and reliable alignment when the table is opened.
• Arched to Prevent Sag: The four-leg extender is convex and the pedestal-style extender is concave – each arched in the direction that compensates for natural sag under load when the table is extended.
• Equalizers on Pedestal Style: Pedestal extenders include equalizers that prevent the table halves from tipping as the top is pulled apart, a common problem with single-pedestal tables.
• Two Length Options: Available in 26" and 46" closed lengths, opening to 51" and 92" respectively, to suit tables from small dining tables to large extension tables.
• Ready to Finish: Made from three pieces of 7/8" × 2 1/4" hardwood, drilled and countersunk for attachment – can be stained or finished to match the table.
• Made in Canada