Brusso - LIST OF ALL

Brusso - LIST OF ALL

Results 71 - 80 of 135 Show:     Items Per Page
  • h7060.jpg
    h7060.jpg
    BRUSSO - The L-23 brass offset pivot cabinet hinge is employed when a minimum of visible hardware is desired or when the door must swing free of its frame. It is mortised into the top and bottom of the door and frame; only the pivot is visible. The...
    Item Code: H7060
    $ 95.45
    Item Code: H7060
    $ 95.45
    h7126.jpg
    h7126.jpg
    BRUSSO - The CB-301BS full mortise butt hinge with ball finials, milled from stainless steel, is the smallest of four versions manufactured for boxes and small cabinets. Stainless steel gives the hinge a modern look and does not tarnish, making it...
    Item Code: H7126
    $ 97.60
    Item Code: H7126
    $ 97.60
    h7123.jpg
    h7123.jpg
    BRUSSO - The CB-301 full mortise butt hinge, milled from heavy brass stock, is the smallest of four versions manufactured for boxes and small cabinets. Available with or without ball finials, the hinge is sold in pairs. It measures 3/4 inches x...
    Item Code: H7123
    $ 98.49
    Item Code: H7123
    $ 98.49
    h7180.jpg
    h7180.jpg
    BRUSSO - The JB-101 brass square knuckled full mortise butt hinge is engineered with a built-in stop that allows a lid to remain open at 95deg.. It is milled from heavy brass stock and can be used when an additional stay is not desired. It measures...
    Item Code: H7180
    $ 98.49
    Item Code: H7180
    $ 98.49
    h7091.jpg
    h7091.jpg
    BRUSSO - The ST-12S stainless-steel straight pivot cabinet hinge is employed when a minimum of visible hardware is desired or when the door must swing free of its frame. It is mortised into the top and bottom of the door and frame; only the pivot is...
    Item Code: H7091
    $ 108.30
    Item Code: H7091
    $ 108.30
    h7310.jpg
    h7310.jpg
    BRUSSO - The K-2 brass heavy-walled shelf support sleeve is mortised flush into the side of a case, providing an anchor for the K-10 shelf support pin. The sleeve measures 3/8 inches in diameter x 7/16 inches deep. DIMENSIONS
    Item Code: H7310
    $ 112.20
    Item Code: H7310
    $ 112.20
    h7184.jpg
    h7184.jpg
    BRUSSO - The JB-103 brass square knuckled full mortise butt hinge is engineered with a built-in stop that allows a lid to remain open at 95 degrees. It is milled from heavy brass stock and can be used when an additional stay is not desired. It...
    Item Code: H7184
    $ 112.79
    Item Code: H7184
    $ 112.79
    h7188.jpg
    h7188.jpg
    BRUSSO - The JB-804 brass full mortise hinge is engineered with a built-in stop that allows a lid to remain open at 95?. The hinge is mortised flat into the box and lid and can be used when an additional stay is not desired. It measures 1-1/4 inches...
    Item Code: H7188
    $ 113.00
    Item Code: H7188
    $ 113.00
    h7092.jpg
    h7092.jpg
    BRUSSO - The ST-18 brass straight pivot cabinet hinge is employed when a minimum of visible hardware is desired or when the door must swing free of its frame. It is mortised into the top and bottom of the door and frame. The leaf measures 1-3/4" x...
    Item Code: H7092
    $ 115.92
    Item Code: H7092
    $ 115.92
    h7182.jpg
    h7182.jpg
    BRUSSO - The JB-102 square knuckled full mortise butt hinge is engineered with a built-in stop that allows a lid to remain open at 95 Degrees. It is milled from heavy brass stock and can be used when an additional stay is not desired. It measures...
    Item Code: H7182
    $ 118.21
    Item Code: H7182
    $ 118.21

Product Categories