VERITAS

When attached to the Veritas Compact Router Base Plate, this fence and center kit lets you use the edge of a workpiece as a reference when making freehand cuts with a compact router. It can also be set to accurately guide the router when cutting arcs or circles. The 6" (150mm) rods allow offsets from zero to 5" (125mm) with the straight fences and diameters from 6 1/2" to 20 1/2" (165 ~ 520mm) with the circle head.

The plus is this can be atached independently to any router sub base as the trunnions do not need to match the hole spacing of any particular router.

It includes two straight fences made of torrefied maple (both 6" - 150mm - long, one 1 1/4" (32mm) wide and the other 5/8" (16mm)  wide for thin stock), a pair of curve guides, and a circle head with three interchangeable centers (sharp pin, 1/4" (6.35mm) post and flat disc).