Liberon Danish Oil

Hard wearing, alcohol & water resistant, quick drying, low odour, easy to maintain rubbing oil. Contains Tung Oil.

Feeds and protects hard and soft woods.

Purpose
Liberon Superior Danish Oil is a blend of pure tung oil and natural oils which protect hard and
soft woods. It is a penetrating oil, which brings out the natural grain of the timber and provides a
satin to gloss sheen. With added UV filters to help prevent discolouration from the sun it is
suitable for both interior and exterior use.

Performance

• Blend of pure Tung Oil and natural oils
• Feeds, protects and enhances the natural colour of wood
• Added UV filter for protection against sunlight
• Water, heat and alcohol resistant
• Quick drying formula
• Suitable for interior and exterior use
• EN71 Approved - Safe for toys

How to Use

Preparation
Interior woodwork :
Ensure the surface is bare: remove any wax finishes with Liberon Wax and Polish Remover and any varnish finishes with Liberon
Fine Wood Stripper. Clean, dry and ensure the surface is dust free. If required stain the wood with Liberon Palette Wood Dye before
oiling.
Exterior woodwork :
Ensure the surface is clean, dry and free from decaying timber. Surface greying or mould should also be removed as this may cause
blackening of the timber.

Application
Interior woodwork :
Apply with a brush or lint-free cotton cloth and allow to penetrate for 5 to 10 minutes before wiping off excess with a clean lint free
cloth. Allow to dry for a minimum of 5 hours and apply more coats as required. We recommend a minimum of 3 coats. For best
results gently rub with Liberon Ultra Fine Steel Wool (0000) between coats. In damp areas such as kitchens, bathrooms more coats
will be required to ensure adequate protection.
Exterior woodwork :
Apply as above. Application of 4 coats will give minimum protection. Exposed areas will require more coats. It is important to ensure
sufficient coats of oil are applied initially to give maximum protection. It is not necessary to remove excess on sawn timber, but wipe
off any runs.

Important
Oil finishes bring out the natural colours of timber. A wet surface will be an indication of the final colour. Always test product on spare
surface of inconspicuous area for colour, compatibility and end result.
Cleaning and maintenance
Interior woodwork :
Surfaces may be cleaned using a damp cloth and spills should be wiped up immediately. For stubborn stains a mild detergent can be
used. Surfaces need to be re-oiled once a year or more, depending upon usage.
Exterior woodwork :
Clean off any surface grime, moulds etc. (sand if required) before re-oiling. Exterior timbers need to be maintained on a regular basis,
at least twice a year.

Precautions

• Superior Danish Oil may darken some timbers and blackening may occur on some external timbers
• Store Liberon Superior Danish Oil at a temperature above 5 C. Always replace the lid otherwise the oil can deteriorate.
• Oily cloths can self combust. Do not leave impregnated cloths in bundles. Before discarding lay them flat outside to dry to avoid a fire hazard.
• Superior Danish Oil is not suitable for use on external oak. Liberon Pure Tung Oil is recommended for this purpose.
• If the excess is not removed and the surface becomes sticky, wipe with white spirit to remove the sticky film and allow to dry before continuing.

Coverage: 1L = 10-12m²
Pack Size: 250ml, 500ml, 1L, 2.5L, 5L
Drying Time: Minimum 5 hours
Tool Cleaning: White Spirit
Application: Brush