Browse by Category (The Wood Works)

PLANES-BLOCK

	Plane, Block, Adjustable Mouth, Standard Angle, Iron, #LN-9 1/2	LIE NIELSEN -These Iron Block Planes are 6" long with a 1-3/8" x 1/8" thick blade. Bodies are ground to a tolerance of < 0.001", & feature a moveable shoe to allow a precise mouth opening. You can easily adjust the tool to suit the work being done - a very fine mouth setting for finishing work the merest shavings, or an ample opening for rank cuts. Blade on the Low Angle tool is bedded at 12 deg, the Standard Angle at 20 deg. Blade on the Low Angle tool is at 12 deg, the Standard Angle at 20 deg. NOTE: LOW ANGLE VERSION PICTURED, STANDARD ANGLE VERSION SUPPLIED UNDER THIS ITEM CODE.
	$299.00
	Plane, Block, Adjustable Mouth, Low Angle, #LN-60 1/2	LIE NIELSEN -These Iron Block Planes are 6" long with a 1-3/8" x 1/8" thick blade. Bodies are ground to a tolerance of < 0.001", & feature a moveable shoe to allow a precise mouth opening. You can easily adjust the tool to suit the work being done - a very fine mouth setting for finishing work the merest shavings, or an ample opening for rank cuts. Blade on the Low Angle tool is bedded at 12 deg, the Standard Angle at 20 deg. Blade on the Low Angle tool is at 12 deg, the Standard Angle at 20 deg.
	$299.00
	Plane, Block, Standard Angle, #LN-103	LIE NIELSEN - These small bronze planes fit perfectly in the hand and slip easily into the pocket. The 5¼" body holds a 1¼" x 1/8" thick blade. An unobtrusive Stainless Steel adjuster offers blade control of micrometer ease and precision with minimum backlash. The blade in the Low Angle Plane is bedded at 12° for fine cuts and end grain. The blade in the standard angle is set at 20° and will take a heavier cut with the grain.
	$219.00
	Plane, Block, Low Angle, #LN-102	LIE NIELSEN - These small bronze planes fit perfectly in the hand and slip easily into the pocket. The 5¼" body holds a 1¼" x 1/8" thick blade. An unobtrusive Stainless Steel adjuster offers blade control of micrometer ease and precision with minimum backlash. The blade in the Low Angle Plane is bedded at 12° for fine cuts and end grain. The blade in the standard angle is set at 20° and will take a heavier cut with the grain.
	$219.00
	Plane, Block, Skew, with Nicker, #LN-140	LIE NIELSEN - This unusual plane derives from the Stanley No. 140, which was taken out of production many years ago. It is a Block Plane with a skewed blade and a removable side plate to allow quick conversion from general planing to rabbeting. The l½" x 1/8" thick blade is bedded at 12°, and has a captive nut for positive and accurate adjusting. Body is 6-7/8" x 1-7/8" NOTE: PICTURED WITH SIDE REMOVED FROM PLANE FOR REBATING - SIDE IS INCLUDED.
	$427.00
	Plane, Block, Adjustable Mouth, Std Angle, Grooved, #LN-9 1/2g	LIE NIELSEN -This is the standard 20 degree bedded angle Iron Block Plane, 6¼" long with a 1-3/8" x 1/8" thick blade with a central groove for rod makers. Bodies are ground to a tolerance of < 0.001", & feature a moveable shoe to allow a precise mouth opening. You can easily adjust the tool to suit the work being done - a very fine mouth setting for finishing work the merest shavings, or an ample opening for rank cuts.
	$379.00
	Plane, Block, Convex Sole, #LN-100	LIE NIELSEN - This curved sole low angle block plane is perfect for all sorts of hollowing jobs, chair seats, moldings, model making, etc. The radius across the width of the sole is 3 inches, from end to end the radius is 27 inches. The sole is 3 1/2 inches long and the overall length with the squirrel tail handle is 5 inches. The 1/8 inch thick A-2 steel blade is 7/8 inches wide. Ductile Iron body, bronze cap. Weight 8 oz.
	$179.00
	Plane, Block, Model Maker's, #LN-	LIE NIELSEN - This delightful, small low angle tool fits snugly in the palm of your hand. It is a miniature work-horse, ideal for all sorts of chamfering and trimming jobs. Blade is 7/8" wide, 0.125 thick. At 4 3/8" long and 1 1/4" wide, weighing 8oz., this plane is effortless to use.
	$139.00
	Plane, Block, Rebate, Adjustable Mouth, Bronze #LN-60 1/2R	LIE NIELSEN - Years ago, Sargent made a small rabbeting block plane, No. 507. It’s a great design, handy as a block plane and wider than most rabbet planes, making it easy to trim tenons to fit. Blade bedded at 12°. Non-adjustable mouth, 1¾" overall width, 6¼" long, unbreakable Ductile Iron body. Bronze cap, 1/8" thick blade, body ground flat and square to .001".
	$379.00
	Plane, Block, Low Angle, with A2 Blade, #05P22.01	VERITAS - Ductile iron, block plane with extra thick blade and unique combined lateral and feed adjust mechanism. Adjustable mouth, 12 deg. bed and 25 deg. on blade delivers a 37 deg. angle at the cut. Body is 6 3/8 x 2 inches.
	$223.58
	Plane, Block, Standard Angle, with A2 Blade, #05P22.30	VERITAS - Ductile iron, block plane with extra thick blade and unique combined lateral and feed adjust mechanism. Adjustable mouth, 20 deg. bed and 25 deg. on blade delivers a 45 deg. angle at the cut. Body is 6 3/8 x 2 inches.
	$223.58
	Plane, Block, Apron, with A2 Blade, #05P27.02	VERITAS - Ductile iron, block plane with extra thick blade and unique combined lateral and feed adjust mechanism. This is the slightly lighter and less bulky Veritas block plane suited to living in your front apron pocket. Non adjustable mouth, 20 deg. bed and 25 deg. on blade delivers a 45 deg. angle at the cut. Body is 6 3/8 x 2 inches. Has 12 deg. bed and 25 deg. on blade delivers a 37 deg. angle at the cut. Body is 5 1/2 x 1 34 inches. Plane weight is 14 ounces (400 gms).
	$165.22
	Plane, Block, 42mm blade, 150 x 55 x 25mm, White Oak, #717013	Japanese white oak block plane with heavy blade and chip breaker.
	$164.85
	Plane, Block, 150mm x 39mm Iron, 50 deg Bed, Lignum Sole, #649P	EMMERICH - Block Plane - German made by E.C. Emmerich. This block is famous for its feel, 150mm long with a white beech body and self lubrcating lignum vitae sole.
	$152.25
	Plane, Block - Gidgee, (Tool Steel), #12173	HNT GORDON - Dual action 85 degree scraper & 55 degree plane. Blade orientable backwards for scraping action. Especially good on cranky grain. Made in Australia. Overall 175mm long x 54mm wide x 38mm high, about 800gms.
	$160.00
	Plane, Block - Gidgee, (High Speed Steel), #12173-1	HNT GORDON - Dual action 90 degree scraper & 60 degree plane. Blade orientable backwards for scraping action. Especially good on cranky grain. Made in Australia. Overall 175mm long x 54mm wide x 38mm high, about 800gms.
	$210.00
	Plane, Micro Block, #101, #703154	KUNZ - Pocket block, 25mm blade x 85mm sole overall x 120gram. German made
	$39.25
	Plane, Palm, Beaver Tail Block, #100, #703120	KUNZ - Pocket block with Beaver Tail, 25mm blade x 85mm sole overall x 160gram. German made
	$40.51
	Plane, Block, #9 1/2, #12-020	STANLEY - The current production model of a STANDARD angle block plane with long heritage and numerous variants made across the world over time. This is the conventional blade angle version and has an adjustable mouth, screw adjust blade feed and lateral adjustment. Blade 41.5mm at 21 degrees (bevel up) and body 160mm overall.
	$127.33
	Plane, Block, #60 1/2, #12-060	STANLEY - The current production model of a LOW angle block plane with long heritage and numerous variants made across the world over time. This is the narrow body, low blade angle version and has an adjustable mouth, screw adjust blade feed and lateral adjustment. Blade 35mm at 13.5 degrees (bevel up) and body 160mm overall.
	$124.97
	Plane, Block, #220, #12-220	STANLEY - The current production model of a standard angle block plane with long heritage and numerous variants made across the world over time. This is the conventional blade angle version non adjustable mouth, screw adjust blade feed and lateral adjustment. Blade 41.5mm at 21 degrees (bevel up) and body 160mm overall.
	$87.59