Akagashi Universal 270

For precise cuts along, across or diagonal to the fibre. Strongly set teeth minimize the friction and allow you to easily correct the direction of the cut. Due to the special tooth design with wider spacing the saw kerf stays clean. The extra-long handle is very comfortable to hold. In short, this saw is an all-rounder.

This Akagashi range of saws allows combining any of 5 handle sizes and styles with any one of 10 interchangeable blades.

The eight complete as-supplied saw options are here

• T1287 - Universal 270, O'all 520mm, Blade 60 x 0.6 x 270mm, Kerf 0.75mm, Crosscut, Pitch 1.9mm/13tpi
• T1288 - Rough 270, O'all 520mm, Blade 60 x 0.6 x 270mm, Kerf 0.8mm, Crosscut, Pitch 1.9mm/13tpi
• T1289 - Fine 250, O'all 500mm, Blade 60 x 0.5 x 270mm, Kerf 0.8mm, Crosscut, Pitch 1.4mm/18tpi
• T1290 - Extra Fine 180, O'all 410mm, Cut depth 22mm, 0.3 x 150mm, Pitch 1.0mm/25tpi
• T1291 - Rough 210, O'all 410mm, Blade 35 x 0.6 x 210mm, Kerf 0.9mm, Crosscut, Pitch 1.9mm/13tpi
• T1292 - Flushcut 170, O'all 335mm, Blade 35 x 0.4 x 210mm, Crosscut, Pitch 1.0mm/25tpi
• T1293 - Keyhole 150, O'all 340mm, Blade 10~15 x 0.6 x 150mm, Kerf 0.8mm, Crosscut, Pitch 1.6mm/16tpi
• T1294 - Rip 250, O'all 490mm, Blade 60 x 0.5 x 250mm, Kerf 0.7mm, Graduated Rip, Pitch 1.7~3.5mm

The five handle Options are here

• T1280 - straight 215mm
• T1281 - straight 175mm
• T1282 - straight 135mm
• T1283 - bent 165mm
• T1284 - bent 125mm

The 10 blade options are here

• L1040 - Rough 270, 60 x 0.6 x 270mm, Kerf 0.8mm, Crosscut, Pitch 1.9mm/13tpi
• L1041 - Fine 250, 60 x 0.5 x 270mm, Kerf 0.8mm, Crosscut, Pitch 1.4mm/18tpi
• L1042 - Rough 210, 35 x 0.6 x 210mm, Kerf 0.9mm, Crosscut, Pitch 1.6mm/16tpi
• L1043 - Keyhole 150, 10~15 x 0.6 x 150mm, Kerf 0.8mm, Crosscut, Pitch 1.6mm/16tpi
• L1044 - Semi fine 250
• L1045 - Hardwood 210
• L1046 - Flushcut 170, 35 x 0.4 x 210mm, Crosscut, Pitch 1.0mm/25tpi
• L1047 - Rip 250, 60 x 0.5 x 250mm, Kerf 0.7mm, Graduated Rip, Pitch 1.7~3.5mm
• L1048 - Rough 270, 60 x 0.6 x 270mm, Kerf 0.8mm, Crosscut, Pitch 1.9mm/13tpi
• L1049 - Universal 270, 60 x 0.6 x 270mm, Kerf 0.75mm, Crosscut, Pitch 1.9mm/13tpi
  
  Detail Of The Handle To Blade Junction